- This topic has 1 reply, 2 voices, and was last updated 11 months, 4 weeks ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Well, if there is one thing I’ve learned – it is better to cut those squares for HSTs 1″ (not 7/8″) bigger than the finished size, and then trim them using the 45° angle on the ruler. SO much more accurate!
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.